Durable Protective Tapes and Tape Coating
Boost your bottom line with the protective tapes and tape coating from TexStar Products, LLC in Daingerfield, TX. Our tapes offer protection in a range of climate conditions and for a variety of surfaces. Several tapes contain “integrated primer,” meaning the primer is in the adhesive. This exclusive formula allows for faster application as there is no need to apply a separate liquid primer when application temps are above 40° F.
Tapes
58-mil hot applied coal-tar tape. Meets AWWA C203.
Tapes with “integrated primer.” Meets AWWA C209.
- H35 Gray—35 mil UV resistant for above or below grade.
- H50 Gray—50 mil UV resistant for above or below grade.
- M50 RC Gray/Black—50 mil with mesh backing, below grade only.
A 65-mil coating, packaged in 6 X 6 pads, with a polypropylene, mesh fiber backing, and pressure-sensitive adhesive; used for easy application as a protective coating on small holidays, wire splices, and thermite welds.
35-mil cold-applied tape coating with “integrated primer” for below grade only.
65-mil cold-applied coating with “integrated primer” for below grade. Meets AWWA C209. High conformability, good on tees, bends, etc.
35-mil cold-applied tape coating with “integrated primer” for ambient temperature below-grade application. Meets AWWA C209.
Prefabricated assemblies designed to provide quick, field-applied corrosion protection to anode and test lead wire welds on metal pipes and tanks.
- TC Handy Cap—4″x4″ (Also called Royston HandyCap)
- TC Handy Cap IP—4″x4″, Integrated Primer
- TC Handy Cap XLIP—5″x5″, Integrated Primer
High temp to 250° F, above or below grade 30-mil tape, apply with 50% overlap to 60 mil.
High temp to 300° F, for below grade only 40-mil tape, apply with 50% overlap to 80 mil.
Black, machine-applied high/low-density polyethylene film, calendered with a butyl rubber adhesive.
Low-density polyethylene film, calendered with a butyl rubber adhesive. The product is available in black, white, and light blue.
Low-density polyethylene film, calendered with a butyl rubber adhesive. The product is available in black, white, gray, and light blue.
Machine-applied polyethylene film, calendered with a butyl rubber adhesive.
Machine-applied polyethylene film, calendered with a butyl rubber adhesive. Meets AWWA C-214.
A specially formulated, 100% solids, conformable watertight coating for metal, fiberglass, and wood surfaces.
A 70-mil petrolatum blend, wax-saturated fiber-tape for ambient to 300°F-temperature application.
A multi-environmental coating system designed to protect piping and metal structures from corrosion.
Protective reinforced fiberglass mesh used as an outerwrap to enhance the mechanical strength of any coating. It is moisture-activated and will not shield or interfere with cathodic protection systems. Available in yellow, blue, red, green, gray, and white.
Pipeline tapes engineered to efficiently and effectively protect underground pipelines from corrosion.
10 or 20 mil flexible, “all-weather,” polyvinyl, high-tensile strength film.