Tracer Wire
HDD-CCS features a higher break-load and tensile strength compared to solid copper. Designed for directional boring and pipe bursting installations where tensile strength is critical.
HF-CCS PE30 tracer wire embodies the flexibility and memory of solid copper while still being stronger at a lower cost. It is commonly used for open-cut, plow-in, and blow-in installations.
Copper PE45
Copper PE45 features a solid or stranded conductor core with great conductivity. The insulation is 45 mil thick and is made of a High-Density, High Molecular Weight Polyethylene (HDHMWPE). This tracer wire is rated for direct burial and is commonly used in Open-Trench/Open-Cut, Plow-In, or Blow-In installations, but we recommend the 45 mil version over the 30 mil version for boring installations because of the extra abrasion protection.
HS-CCS PE30/PE45 tracer wire strikes a perfect balance of strength and flexibility compared to solid copper while minimizing damage during installation and while in service. It is best suited for open-cut, plow-in, and light-directional boring installations.
Copper PE30/PE45 is a soft-drawn annealed tracer wire made from an oxygen-free copper cathode. It has fantastic flexibility and memory properties. It is commonly used for open-cut, plow-in, and blow-in installations.
Solid Copper TXU/UF
Copper TWU/UF is a soft-drawn annealed tracer wire made from an oxygen-free copper cathode. It has fantastic flexibility and memory properties. It is commonly used for open-cut, plow-in, and blow-in installations.
Copper THHN and TFN/TFFN
Copper THHN and TFN/TFFN is a soft-drawn annealed tracer wire made from an oxygen-free copper cathode. It has fantastic flexibility and memory properties. It is commonly used for open-cut, plow-in, and blow-in installations.